Blog · 2026-09-28
What to check when buying a used film camera
Buying a used film camera is the best way into analog — and the easiest way to get burned. Bodies from the 1970s and 80s are cheap, but "cheap" and "works" are two different things. A camera that looks perfect in photos can still have a dead meter, a stuck shutter, or light leaks that eat every frame.
You don't need to be a technician. You just need to know what to look at before you hand over money.
1. Shutter speeds
This is the single most important test. Set the camera to bulb (B) or the slowest speed, open the back, fire, and watch the shutter curtains travel. They should open and close cleanly, at visibly different speeds as you change the dial.
- At 1/1000s the curtain should flash almost invisibly fast.
- At 1s it should stay open for a full second.
- At bulb, it should stay open the whole time you hold the button.
If a speed sounds "crunchy" or fires at the wrong speed, walk away. Shutter repairs are often more than the camera is worth.
2. Light seals
Foam light seals rot after 30–40 years. When they fail, light leaks in through the back and fogs your frames. You'll see it as uneven orange bands on one side of the negatives.
To check: look at the foam around the film door and hinge. It should be intact and springy, not crumbled to black dust. It's a cheap, easy fix — so don't walk away, just negotiate the price down.
3. The light meter
Most old cameras have a built-in CdS or selenium meter. Selenium meters (common on 1960s cameras) often still work; CdS meters need a battery.
Put a fresh battery in, point the camera at a bright wall, and see if the needle/display moves when you change shutter speed or aperture. If it doesn't move at all, the meter is dead. That's survivable — you can use a phone app or the Sunny 16 rule — but it's another reason to offer less.
4. The lens
Look through the lens at a bright light source (a window works). You're checking for:
- Fungus — web-like filaments inside the glass. Usually harmless if light, but never pay full price.
- Haze — a cloudy, washed-out look.
- Fungus/bubbles between elements.
- Oil on the aperture blades — they should open and close cleanly, not stick.
Small dust is normal and fine. Fungus that looks like spiderwebs is a pass.
5. Wind, rewind, and frame counter
Wind the lever — it should have firm resistance and click. Fire, then wind again: the frame counter should advance. Rewind should turn smoothly without feeling like it's grinding.
Open the back and check the film spools and pressure plate are clean — no sticky residue, no old film bits stuck inside.
6. Battery compartment and battery door
Corrosion in the battery compartment is a red flag. Green or white crust means batteries have leaked. Clean it with vinegar and a cotton swab if it's minor; walk away if it's eaten into the contacts.
7. Ask for sample photos
If buying online, ask the seller for actual scanned photos taken with that camera. This is the test nobody asks for. A roll of real photos tells you more than ten close-ups of the body: the meter, the shutter, and the lens all work together on a sample.
A simple rule for the price
Every flaw is a discount:
| Flaw | Negotiate down |
|---|---|
| Meter dead | 20–30% |
| Light seals crumbling | 10–15% (easy fix) |
| Minor lens dust | nothing |
| Fungus/haze in lens | 30–50% |
| Shutter sticking | walk away |
Used film cameras are bought with the heart, but checked with the eyes. Do the seven checks above and you'll skip 90% of the nightmares. The rest is just finding one that feels good in your hands.
Next: listings are full of words like Mint, LNIB, and CLA'd that sellers throw around loosely — here's what condition terms actually mean before you trust them. And once your camera arrives, here's how to develop your first roll at home.
Comments
Leave a note if you want. It waits for a quick review before it shows up. No account needed.